Safe operation of this tool requires that you read and under-
stand this operator's manual and all labels affixed to the tool.
READ ALL INSTRUCTIONS
KNOW YOUR ACCESSORY. Read the operator's manual
carefully. Learn the product's applications and limitations
as well as the specific potential hazards related to this
product.
KEEP THE WORK AREA CLEAN. Cluttered work areas
and work stations invite accidents.
ALWAYS WEAR EYE PROTECTION WITH SIDE
SHIELDS MARKED TO COMPLY WITH ANSI Z87.1.
Failure to do so could result in objects being thrown into
your eyes, resulting in possible serious injury.
ALWAYS GET HELP IF YOU NEED TO LIFT THE
WORKSTATION. When lifting, hold the workstation close
to your body. Bend your knees so you can lift with your
legs, not your back.
WHEN HAULING THE WORKSTATION IN A VEHICLE,
securely tie it down to prevent movement and possible
damage.
RULES FOR SAFE OPERATION
2 – English
Benchtop tools must be bolted or clamped to tabletop
of workstation. Holes can be drilled into the tabletop
to accept mounting bolts.
NEVER put the workstation where operators or
bystanders are forced to stand with any part of their body
in line with a path of any tool mounted to the workstation.
NEVER STAND OR SIT ON WORKSTATION. Serious
injury could occur if the workstation tips. Do not store
any items above or near the stand where anyone might
climb on the stand to reach them.
MAXIMUM WEIGHT ON THE TABLETOP OF THE
WORKSTATION MUST NOT EXCEED 400 POUNDS.
MAXIMUM WEIGHT ON THE SKID PLATE IN CART
MODE MUST NOT EXCEED 300 POUNDS.
THE MAXIMUM WEIGHT OF ALL THE ITEMS PLACED ON
EACH ACCESSORY RAIL MUST NOT EXCEED 15 LBS.
CHECK TO MAKE SURE WORKSTATION DOES NOT
ROCK, SLIDE OR MOVE PRIOR TO USE.
PUT THE WORKSTATION ON A FIRM LEVEL SURFACE
where there is plenty of room to handle and properly sup-
port the workpiece.
SAVE THESE INSTRUCTIONS. Refer to them frequently
and use them to instruct other users. If you loan someone
this product, also loan these instructions.