Publicidad
Radio operating band
FM
SW（AM/LSB/USB）
When the MW step value is 9KHZ
When the MW step value is 10KHZ
LW
VHF
UHF
AIR
CB
WB
Enable the shuttle to quickly adjust the target frequency:
Rotate the small fly button[
shifted. If the number needs to be changed, you can rotate the small shuttle button at this time, and the flashing position of the
number will change rapidly until the target frequency is adjusted.
7.3.5 About [
] band quick switching
SW short wave ● VHF very high frequency ● UHF ultra high frequency ● AIR aviation bands all have meter bands, the details are as
follows:
Working frequency
The demodulation mode of SW shortwave is in AM
SW shortwave demodulation mode is LSB/USB
VHF very high frequency
UHF ultra high frequency
AIR aviation band
Each time you press the [
frequency point.
7.3.6 Manually save the station
---In the radio receiving mode, use the above 7�3.4 search methods to find the target frequency. Press and hold the [
2 seconds to enter the station storage mode. The main screen LCD displays "PRESET ***" characters flashing. Press the [
again to confirm.
---Press and hold the [
] button lightly to select the station address number (or the station number to be replaced), and tap the [
---Press and hold the [
key, enter the digital storage address number, tap the [
7.3.7 About taking the channel
According to the [ 7.3.4.3 Fully automatic search and save radio stations] method / [7.3.6 Manual radio station save] operation method,
the station saving operation is completed.
---Press the [
] key to enter the channel retrieval mode. When the main screen LCD displays "PRESET CH ***", lightly press the
[
or
] key to select the station retrieval address number.
---After saving a station, you can also directly enter the valid representative number of the saved station number on the numeric key
[
], and press the [ EN ] key again to confirm the station address number and frequency.
If the selected number is not a valid station number, the main screen LCD displays the character [null].
Exit the channel removal mode : Press the [PRESET] button lightly, and the [PRESET] character on the main screen LCD disappears.
Indicates exiting the channel retrieval mode.
Selectable STEP step value
10KHZ, 50KHZ, 100KHZ
0.01KHZ, 0.02KHZ, 0.1KHZ, 1KHZ, 5KHZ
3KHZ, 9KHZ
5KHZ, 10KHZ,
3KHZ, 9KHZ
1KHZ, 5.0KHZ, 6.2KHZ, 7.5KHZ, 12.5KHZ, 25KHZ
1KHZ, 5.0KHZ, 6.2KHZ, 7.5KHZ, 12.5KHZ, 25KHZ
8.3KHZ, 12.5KHZ, 25KHZ
0.01KHZ, 0.02KHZ, 0.1KHZ, 1KHZ, 5KHZ
25KHZ
], the frequency number flashes, lightly press the inner wheel button [
] key, press [
or
] button for 2 seconds. The main screen LCD displays PRESET *** "characters flashing. Press the [
] key for 2 seconds, the "PRESET ***" character on the main screen LCD is flashing, tap the [
2.3MHZ, 3.2MHZ, 3.75MHZ, 3.9MHZ, 4.75MHZ, 5.73MHZ,
7.1MHZ, 9.25MHZ, 11.5MHZ, 13.57MHZ, 15.03MHZ, 17.48MHZ,
18.9MHZ, 21.45MHZ, 25.67MHZ (15 pcs)
2.3MHZ, 3.5MHZ, 5.3510MHZ, 7.0MHZ, 10.10MHZ, 14.0MHZ,
18.068MHZ, 21.0MHZ, 24.89MHZ, 28.0MHZ,
30.0MHZ, 42.0MHZ, 55.0MHZ, 68.0MHZ, 100.0MHZ, 136.0MHZ,
218.0MHZ, 250.0MHZ (8 pieces)
250.0MHZ, 320.0MHZ, 460.0MHZ, 580.0MHZ, 620.0MHZ,
730.0MHZ, 800.0MHZ, 999.0MHZ (8 pieces)
118MHZ, 123MHZ, 128MHZ, 133MHZ, 138MHZ (5 pieces)
] or the shuttle key together, you can quickly call out the required
] key again to confirm , and complete the manual storage operation .
09
Default step value
100KHZ
5KHZ
9KHZ or 10KHZ
9KHZ
12.5KHZ
12.5KHZ
25KHZ
5KHZ
25KHZ
]. The flashing number is
Meepo
] button for
] button again. confirm.
] button
or
] numeric
Publicidad
