Publicidad
4. APP related content description
Mobile APP download process instructions (for detailed APP operation process, please refer to the APP manual):
1: The first step : turn on the TR113 radio, and at the same time, turn on the user's own mobile phone.
2: Step 2: Download the APP (if you already have our APP software Radio-C, you do not need to re-download it, you can click to
connect to the product named " Retekess-TR113 " and then connect), the specific steps are as follows :
A: For Android and Hongmeng system phones, please scan the following QR code to install the APP
Android and Hongmeng system phones support "scanning" this QR code with the browser on the phone to install the APP. For detailed
operations, please refer to 2.1.
Android and Hongmeng system phones support APP installation using the "WeChat scan" QR code on the phone. For detailed
operations, please refer to 2.2.
B: To install on Apple system mobile phones, please go to the "APP Store " and search for the name "Radio-CT " to download.
You can also scan the QR code below to enter the APP Store interface to download.
5. Function description of each radio button
1: On/off: Press any key to turn on the time display first. In the time state, press lightly to turn on; in
the radio on state, press and hold to turn off.
See description in 7.1.1 for details.
2: In the time display state, press and hold to enter the setting of sleep shutdown time (display
operation on the secondary screen). For details, see 7.1.2 operation description .
Power on state: Tap to switch between FM (frequency modulation); MW (medium wave); LW (long
wave); SW (short wave) bands .
Power on state: Tap to enter VHF/UHF/AIR/CB/WB band switching selection.
1: In FM/AM working state: Tap Yes to select the FM&AM receiving frequency range. For details, see
7.3.2/7.3.3 operation description
2: In SW / UHF / VHF / AIR working state: tap to switch between SW&UHF&VHF&AIR meters (please
see 7.3.5 operation description).
3: TF card working mode:
Tap to enter: sequential play
selection.
4: Insert the TF card and after recording the radio, press and hold to enter the recording folder.
1: Set the bandwidth value in each radio band working mode. For details, see Operation Guide:
7.3.14
2: FM (frequency modulation)/ SW (short wave) working mode: long press to enter the setting
demodulation mode. For details, see the operation introduction: 7.3.11
In radio FM/SW/UHF/VHF/AIR/CB working mode: select LOCAL and DX mode .
1: Radio/AUX-IN/PC working mode: Tap to turn on/off mute.
2: Bluetooth/TF card working mode: tap to pause/play switch
3: In VHF/UHF/AIR/CB/SW working mode: press and hold for 2 seconds to turn on/off SQ (squelch).
1: Power-on working mode: switch between Bluetooth/TF/PC; press and hold to disconnect the
Bluetooth connection.
2: Shutdown clock display mode: Long press to disconnect from the APP.
1: Tap to select the antenna method
2: Long press the setting button to enter the selection of antenna attenuation (according to the
10/20d attenuation entered into the setting, see: 7.3.10 Operation Introduction for details)
, single loop
, repeat current folder songs
02
, random play
Publicidad
