Publicidad
Idiomas disponibles
Idiomas disponibles
Error Codes & Safety Protection
When the cooker experiences unsuitable operations from you or by other means. the
cooker stops functioning exhibiting relevant codes on the display screen. This is meant
only for the protection of the cooker and guidance to you.
Error code
No suitable cookware was
E0
identified
The voltage is too low (less than
E1
85 V)
The voltage is too high (higher
E2
than 285 V)
Error message of the cooktop
E3
sensor / short circuit
Error message of the IGBT
E4
sensor / short circuit
E5
Overheating of the hob
E6
Overheating of IGBT
HOT POINT INDUCTION GRILL
Meaning
Place suitable cookware in the middle
of the corresponding cooking zone
(see cookware chapter)
Check the power supply. If it is normal,
turn the hob back on.
Check the power supply. If it is normal,
turn the hob back on.
Contact the customer service or a
qualified electrician.
Contact the customer service or a
qualified electrician.
• Ensure that the ventilation paths are
• Make sure that the cookware does
• Ensure that the fan is running.
• Ensure that the ventilation paths are
• Make sure that the cookware does
• Ensure that the fan is running.
brunneroutdoor.com
What to do
not blocked and that the ambient
temperature is not too high.
not protrude over the cooking zone
markings in the direction of the
control panel to prevent it from
overheating.
not blocked and that the ambient
temperature is not too high.
not protrude over the cooking zone
markings in the direction of the
control panel to prevent it from
overheating.
ENGLISH
33
Publicidad
