Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting
NOTE:
Before assembly, check that the pipes between the inner and outer parts of the air
conditioner are correctly connected. Also check that the condensation water outlet
is equipped with a rubber stopper. Make sure you have all the accessories.
WARNING!
Carry and store the appliance in an upright position, otherwise there is a risk
of irreversible damage to the compressor. If you are not sure whether the air
conditioner has been stored or transported vertically, we recommend that you
wait at least 24 hours after assembly before turning on the air conditioning.
1. Screw the inner and outer brackets with M6 screws as shown in the illustration.
2. Screw the outer brackets to the back of the air conditioner outdoor unit using M6
screws.
3. Also screw the shockproof rubber shock absorbers to the back of the outdoor
unit.
1. Outer support
1
2
2. Shockproof rubber shock absorbers
EN
E
N
Publicidad
