Makita HR5000 Manual De Instrucciones página 4

WARNING: DO NOT let comfort or famil-
iarity with product (gained from repeated
use) replace strict adherence to safety
rules for the subject product. MISUSE or
failure to follow the safety rules stated in
this instruction manual may cause serious
personal injury.
Symbols
The followings show the symbols used for tool.
volts
amperes
alternating or direct current
no load speed
Class II Construction
revolutions or reciprocation per minute
number of blow
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
► 1. Switch trigger
CAUTION:
• Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
Selecting the action mode
1
2
3
► 1. Change lever 2. For hammering only 3. For rota-
tion with hammering
Rotation with hammering
For drilling in concrete, masonry, etc., rotate the change
lever to the symbol.
Hammering only
For chipping, scaling or demolition operations, rotate
the change lever to the
4 ENGLISH
1
symbol.