6. If you want to adjust the coffee strength, you can press STRONG
button once, and then its corresponding indicator will illuminate.
To turn off STRONG, simply press the STRONG button again and
the indicator will turn off.
7. Press ON/OFF button, the display will change for a few seconds
to allow you to select the number of CUPS you desire to brew.
You can select to brew 4,6,8,10, or 12 cups of coffee. The
red indicator will come on and the coffee machine will begin
brewing.
NOTE: The coffee machine is defaulted to brew all the water in the
reservoir without selecting a specific cup size.
8. The brewing process can be interrupted by pressing the ON/OFF
button at any time, the indicator will go out. The coffee machine
will continue brewing once the ON/OFF button is pressed again.
9. Remove the carafe to serve when the brewing is finished (about
one minute later after the coffee stops dripping out).
Note: The coffee you get will be less than the water you have added,
as some water is absorbed by ground coffee.
10. When the process is finished, if you do not want to serve
immediately, keep the coffee maker switched on and the coffee
will be kept warm in the warming plate. The appliance will
shut off automatically after 2 hours from the ON/OFF button
being activated if it has not been manually disconnected at the
completion of brewing. For an optimum coffee taste, serve it just
after brewing.
11. Always turn the coffee maker off and disconnect the power
supply when not use.
Note: Take care when pouring as the temperature of coffee when
just finished is high.
www.hadenusa.com
7