Haden HC03030-US Manual De Instrucciones página 9

CLEANING & MAINTENANCE
CAUTION: Be sure to unplug this appliance before cleaning.
To protect against electrical shock, do not immerse cord, plug or
unit in water or liquid. After each use, always make sure plug is first
removed from wall outlet.
1. Clean all detachable parts after each use in hot soapy water.
2. Wipe the exterior surface of unit with a soft, damp cloth to
remove stains.
3. Water droplets may build up in the above area of the funnel
and drip onto the product base during brewing. To control the
dripping, wipe off the area with a clean, dry cloth after each use.
4. Use a damp cloth to gently wipe the warming plate. Never use
abrasive cleaner to clean it.
5. Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, periodically you
should clean away the mineral deposits left by the water according
to the water quality in your area and the frequency of use.
1. Fill the tank with water and descaler to the max level as
indicated on water gauge (the mix of water and descaler is
4:1, the detail refers to the instruction of descaler. Please use
"household descaler", you may also use the citric acid instead of
the descaler (One hundred parts of water to three parts of citric acid).
2. Place the serving cup under the brew basket.
3. Ensure the funnel is assembled in place.
4. Switch on the appliance and "brew" the de-scaling solution.
5. After "brew" one-cup solution, switch off the appliance.
6. Leave the solution for 15 minutes and repeat step 3-5.
7. Switch on the appliance and run off the solution until the water
tank is completely empty.
www.hadenusa.com
9