Haden HC03030-US Manual De Instrucciones página 8

DELAY FUNCTION
If you do not want the coffee machine to start working immediately,
you can set the it to brew at a later time. First follow steps 1 to 4
from USING YOU COFFEE MACHINE, then you can set the delay start
function as follows:
1. Press PROG button once, LCD will show the automatic starting time.
2. Press the HOUR and MIN button to set the automatic starting time.
NOTE: the time cycle is 12 hours
3. After a few seconds, the display will change for a few seconds
to allow you to select the number of cups you desire to brew.
You can select to brew 4,6,8,10 or 12 cups. The default ALL cup
function allows you to brew all the water in the reservoir without
selecting a specific cup size.
4. After a while, the LCD will display the current clock,the White
indicator will come on.
NOTE: You may cancel the automatic start function by pressing
PROG button , the white indicator will go out. If you want to change
the automatic start time, only follow the above 1-3 steps again.
5. When the delay time is due, the delay indicator will go out and
brewing indicator will come on. At the end of brewing, 3 buzzer
sounds will be heard.
8
www.hadenusa.com