CODELOCKS CL5000 NetCode Guía De Introducción página 2

About CL5000 NetCode
The CL5000 NetCode
provides convenient, simple access control
via the keypad. The lock supports multi- and
single-use User Codes and includes Codelocks
NetCode
®
temporary, time-sensitive codes via the
Codelocks Connect Portal and API.
For detailed instructions, refer to the CL5000
NetCode
®
Instructions:
codelockssupport.com/cl5000netcode
The Basics
Power
This product requires 4 x 1.5v AA batteries for
operation. High quality, alkaline batteries are
recommended for optimal performance.
Master Code
The factory set Master Code is #12345678.
This should be changed immediately after
installation (Program 10). The Master Code
(and Sub-Master Code if set) always start
with the # button. This puts the lock into
Programming Mode.
Programming
Each programming sequence starts with the
#Master Code or #Sub-Master Code. The
•
singular
represent an acceptance flash; the Blue LED
will illuminate to confirm a correct input.
At the end of a sequence, the Blue LED will
flash twice
programming has been successful.
Access Methods
The lock supports 80 User Codes, 10 One-Time
User Codes and temporary, time-sensitive
NetCodes.
Keypad
The lock has a 12 button keypad which
*
includes
used for programming. The
in some programming sequences and with
NetCodes.
Technology, a method of generating
Programming and Operating
blue dots throughout the sequence
••
confirming it's complete and
and # buttons. The # button is only
®
electronic door lock
®
*
button is used