Cover Pools T3 Evo Manual Del Propietário página 10

ENGLISH
6.6 Lubrication
The working life of the mechanism will be enhanced
and service problems will be reduced if you follow
a regular lubrication schedule. Never over-grease;
excessive lubrication will collect dirt and can
Table 1. Parts Lubrication Requirements
Part
A Opposite End Bearing #130097
B Motor Side End Hub #180349
C Rope Reels #181165
D Double Dog #181167 &
#181174
E Toggle Switch Cover Lock
F Motor
G Hydraulic Tank Fluid*
HYDRAULIC DRIVE*: Hydraulic tank, motor, and lines should be drained, flushed and refilled once per year.
IMPORTANT: Clean and dry the parts before applying lubrication (e.g. using high-pressure water and/or
compressed air).
PARTS LUBRICATION REQUIREMENTS
F
G
* For systems with a hydraulic drive * For systems with a hydraulic drive
Figure 4. Parts Requiring Lubrication (See Table 1)
Page 10
Waterproof lithium type grease (Lubriplate
Waterproof lithium type grease (Lubriplate
NOTE: Cover the pool completely.
Waterproof lithium type grease (Lubriplate
NOTE: Uncover the pool completely and rotate rope
reels.
WD-40 , Motor oil 30w, or similar
®
NOTE: You may need to undo the strap around the
double dog.
Graphite lock lube
Does not require lubrication
Automatic transmission fluid (ATF)
Type "F" or "Dextron III
B
C
D
Cover-Pools T3 Evo
®
possibly get on the vinyl cover or webbing. Grease
on the vinyl or webbing can cause deterioration.
Do not grease or put silicone on the rope, webbing,
or tracks; this will cause rapid deterioration of the
threads, fabric, and track.
Lubrication
#1200-2)
®
#1200-2)
®
#1200-2)
®
"
®
A
Automatic Pool Cover | Owner's Manual
™
Frequency
Twice per season
Twice per season
Twice per season
Twice per season
Twice per year
N/A
Check twice per
season
E