Kenwood TK-270G Manual De Instrucciones página 23

m Dialling Stored DIMF Numbers
To call a number stored in a memory location:
1 Press the * key.
e "A" appears on the display.
2 Enter the desired memory location number (1 ~ 9).
¢ The stored digits are displayed.
3 Press the PTT switch.
¢ |f programmed by your dealer, no DTMF tone will
sound when "D" is transmitted. "D" is used for a
pause time. The pause duration is programmed by
your dealer.
m Clearing Stored DTMF Numbers
To clear the numbers from a memory location:
1 Press the # key twice.
e "D- CLR" appears on the display.
¢ To cancel the process, press any key other than
1-9.
2 Enter the desired memory location number (1 ~ 9).
m Redialling
You can redial the last number you transmitted (16
digits maximum).
1 Press the * key, then press the 0 key.
e "A" and the digits are displayed.
2 Press the PTT switch.
Note: Switching OFF the transceiver power clears the redial
memory.
tsi' i<"li'CCSNCWC®C#;C;zéC