ELICA MEZZANO EMZ630S3 Guía De Instalación, Uso Y Mantenimiento página 10

• Secure the bottom of the duct with 2 - 4 x 8 mm screws.
Complete Installation
• For non-vented (recirculating) installations only, install
charcoal filters over metal grease filter.
See the "Mainteinance" section.
• Install metal filters. See the "Mainteinance" section.
To get the most efficient use from your new range hood, read
the "maintenance" section.
Keep your Use, Care, and installation Guide close to range
hood for easy reference.
Description of the Hood
EMZ630S3 & EMZ636S3 models
5
1
2
1.
Blower and light controls
2. LED lamps
3.
Grease filter handle
10
3
4
4.
Grease filter
5. Duct covers
Control
1 2 3
1.
Button ON/OFF motor (stand by)
2. Button for low speed (suction power) selection
When flashing, it indicates that you must wash the grease filter.
3.
Button for medium speed (suction power) selection
4.
Button for high speed (suction power) selection
5.
Button for intensive speed (suction power) selection
It lasts 5 minutes then it returns to medium speed
(suction power).
6.
Button ON/OFF lighting
Press briefly to switch on or off the lighting of the hood.
Press and hold to adjust the intensity of the light.
Indicators of filter saturation:
At regular time intervals, the hood indicates the need of
performing filter maintenance.
Button on with steady light:
Perform grease filter maintenance.
Button flashing:
Perform activated charcoal filter maintenance.
NOTE: Filter saturation signal is visible within the first minute
after switching off the hood; within this time, the reset of
saturation indicators must be performed.
Reset of filter saturation indicators:
Press and hold the button
Activation of saturation indicator activated charcoal filter:
NOTE: This operation must be performed with the hood off.
This indicator is normally deactivated; press and hold the
button to activate the function: the button lights up with
steady light.
To deactivate the function, press and hold the button
the button lights up flashing.
4 5 6
,