Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Even if all blades are ballasted and grouped by weight, it is impossible to completely avoid
wobble. This is not a problem. Ceiling fans tend to move during operation.
To reduce wobble try the following:
1.
Check that all of the blade mounting screws are tightened and secure.
2.
Fan wobble may be caused by the unevenness of the fan blades. To check the blade level,
measure the distance from each blade tip to the ceiling.
If measurements are irregular:
-
Be sure the blade mount screws are not too tight or too loose, which may cause wobbling
due to an unleveled blade tip.
-
A deformed blade can cause wobbling. Check by removing the blade and placing on a flat
surface.
3.
Blade tracking may be checked simply by use of a household ruler. Place the ruler
vertically against the ceiling and even with the outside leading edge of a blade. Note the
distance of the edge of a blade compared to the others. Turn the blade slowly by hand to
check the remaining blades.
If a blade is not in alignment, the blade is either out of shape, warped or the blade screws are
not evenly tightened or either loose.
7. TECHNICAL SPECIFICATIONS
Product reference: 08558
Product: EnergySilence Aero 5200 Palm
Voltage: 200 - 240 V
Frequency: 50 / 60 Hz
Power: 36 W
Description
Fan maximum flow
Fan power consumption
Service value
Power consumption on standby mode
Fan sound power level
48
ENERGYSILENCE AERO 5200 PALM
Symbol
Value
F
P
SV
P
SB
L
WA
Unit
m
/min
3
W
(m
/min)/W
3
W
dB (A)
Publicidad
