Gladiator Flex Cabinet System I Instrucciones De Ensamblaje página 14

INSTALL CABINET TO GLADIATOR
Install the 24" 2-door Base Cabinet
NOTE: Flex Brackets are sold individually and Gladiator
GearTrack channels are sold separately.
®
1. Install the brackets to the cabinet.
X 2
P6
F3
F5
P6
Temporarily turn the base cabinet upside down as shown.
■
Attach the brackets to the back of the base cabinet as shown
■
with eight M6 round head square neck bolts (F5) and eight M6
flange nuts (F3).
14
CHANNEL
®
X 8 X 8
F5 F3
Two brackets
required as
shown
GEARTRACK
®
2. Hang the base cabinet onto the
GearTrack channels.
®
The GearTrack channels should be installed
®
with the spacing as shown.
Hang the base cabinet onto the GearTrack
■
sure the two brackets are fully engaged in the slots as shown.
NOTE: . For installation of the Gladiator
channels, please refer to the manual instructions included
with the Gladiator GearTrack
®
27"
27"
( 68.58 cm)
channels. Make
®
GearTrack
® ®
channels.
®
®