Gladiator Flex Cabinet System I Instrucciones De Ensamblaje página 9

7. Position the Base Cabinets
IMPORTANT: The M6 x 40 hex tapping bolts should be drilled
into a wall stud.
7a. Install the wall bracket.
X 2 per
Cabinet
F2
X 1 per
Cabinet
P4
Bolt the wall bracket for each base cabinet with two M6 x 40
■
hex tapping bolts (F2) to a wall stud.
ASSEMBLY INSTRUCTIONS
Stud
Wall
F2
31"
31 in.
(78.74 cm)
Floor
7b. Tie the base cabinet and wall bracket
together.
X 1 per
Cabinet
P1
Remove the drawer from the 1-drawer 2-door base cabinet.
■
(see instruction on page 16)
Fasten the base cabinet by using the wall strap to tie the base
■
cabinet and wall bracket together.
7c. Install the drawer and place the top mats.
X 1 per
P7
Cabinet
P7
Install the drawer back into the 1-drawer 2-door base cabinet.
■
(see instruction on page 16)
Place the top mats on top of the base cabinets.
■
P4
P1
9