Gladiator Flex Cabinet System I Instrucciones De Ensamblaje página 5

Tools Required
Gather the required tools and parts before starting installation.
■
Read and follow the instructions included with the required
■
tools.
Tools Needed:
ASSEMBLY INSTRUCTIONS
Hex Wrench
(included)
Drill
with a 10mm
Hex Socket Driver
Bit (not included)
Tape measure
(not included)
#2 Phillips
Head
Screwdriver
(not
included)
1. Install the Adjustable Feet
Close and lock the cabinet doors.
■
NOTE: If you need to open the cabinet doors during adjustable
feet assembly open them slowly and do not put any weight on the
open doors. This avoids damage to the hinges.
X 4 per Cabinet
P2
Two people may be required to complete the assembly. Place
■
the cardboard sheet packaging provided on the ground and
lay the cabinets flat on its back (doors facing up).
Install 4 adjustable feet to the bottom of each base cabinet
■
and tall cabinet as shown
P2
5