Bosch GTM 12 Professional Manual Original página 52

OBJ_BUCH-302-007.book Page 52 Tuesday, December 7, 2010 11:10 AM
52 | English
Safety Warnings for Use as a Table Saw
Make sure that the guard operates properly
and that it can move freely. It must face
against the table before sawing and against
the workpiece while sawing; never lock the
guard in place when opened.
Never reach behind the saw blade in order
to hold the workpiece, remove saw
dust/wood chips or for any other reason.
The clearance of your hand to the rotating
saw blade is too small.
Guide the workpiece against the saw blade
only when the machine is switched on. Oth-
erwise there is damage of kickback, when
the saw blade becomes wedged in the work-
piece.
Only saw one workpiece at a time. Work-
pieces placed on top or aside of each other
can cause the saw blade to jam or the work-
pieces to move against each other while saw-
ing.
Symbols
The following symbols can be important for the operation of your power tool. Please memorise the
symbols and their meanings. The correct interpretation of the symbols helps you operate the power
tool better and more secure.
Symbol
1 609 929 V07 | (7.12.10)
Always use the parallel guide or the angle
guide. This improves the cutting accuracy
and reduces the possibility of saw blade
binding.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Meaning
Do not direct the laser beam at persons or animals and do
not stare into the laser beam yourself, not even from a dis-
tance. This power tool produces laser class 2 laser radiation
according to EN 60825-1. This can lead to persons being
blinded.
Do not dispose of power tools into household waste!
Only for EC countries:
According to the European Guideline 2002/96/EC for Waste
Electrical and Electronic Equipment and its implementation in-
to national right, power tools that are no longer usable must be
collected separately and disposed of in an environmentally cor-
rect manner.
Keep hands away from the cutting area while the machine
is running. Danger of injury when coming in contact with the
saw blade.
Bosch Power Tools