Bosch GTM 12 Professional Manual Original página 54

OBJ_BUCH-302-007.book Page 54 Tuesday, December 7, 2010 11:10 AM
54 | English
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The power tool is intended as a stationary ma-
chine for making straight lengthways and cross-
ways cuts in wood. Horizontal mitre angles of
–48° to +48° as well as vertical bevel angles of
–2° to +48° are possible.
The machine is designed with sufficient capacity
for sawing hard and softwood as well as press
and particle board.
When operating as a table saw, the power tool
is not permitted for cutting aluminium or other
non-ferrous metals or alloys.
Product Features
The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 OFF pushbutton
2 ON pushbutton
3 Mounting holes
4 Recessed grips
5 Allen key (size 6 mm)/slotted screwdriver
6 Metal bar of tilt protector
7 Saw blade
8 Dust bag
9 Sawdust ejector
10 Locking screw of lever 11
11 Handle
12 Allen screw (size 6 mm) for mounting of saw
blade
13 Spindle lock
14 Clamping flange
15 Interior clamping flange
16 Laser lens cover
1 609 929 V07 | (7.12.10)
Chop and Mitre Saw Features
19 Release button of the tool arm
20 Handle
21 Laser unit
22 Retracting blade guard
23 Quick-action clamp*
24 Saw table of the chop and mitre saw
25 Scale for mitre angle (horizontal)
26 Insert plates
27 Locking knob for various mitre angles
28 Lever for mitre angle adjustment
(horizontal)
29 Detents for standard mitre angles
30 Holes for quick-action clamp
31 Saw-Table extension
32 Fence
33 Stop screw for 33.9° bevel angle (vertical)
34 Stop bolt for 33.9° bevel angle (vertical)
35 Lighting unit
36 Light switch ("Light")
37 Switch for marking of cutting line ("Laser")
38 Clamping lever for various bevel angles
(vertical)
39 Allen screws (6 mm) of the fence
40 Laser warning label
41 Transport safety-lock
42 Allen screws of the saw table extension
43 Extension bar*
44 Drill holes for extension bars
45 Threaded rod
46 Clamping lever of the quick-action clamp
47 Locking bracket
48 Fine scale
49 Indicator for bevel angle
50 Scale for bevel angle
51 Lock screw of the lighting unit
52 Screws for insert plate
53 Rubber cap
54 Adjustment screw for laser position
(parallelism)
55 Adjustment screw for laser position
(flush levelling)
Bosch Power Tools