Bosch GTM 12 Professional Manual Original página 55

OBJ_BUCH-302-007.book Page 55 Tuesday, December 7, 2010 11:10 AM
56 Adjustment screw for laser position
(lateral deviation)
57 Screw for fine scale
58 Screw for bevel angle indicator
59 Allen screw (size 3 mm) for standard bevel
angle 0° (vertical)
60 Allen screw (size 3 mm) for standard bevel
angle 45° (vertical)
Table Saw Features
61 Saw table of the table saw
62 Riving knife
63 Parallel guide
64 Push stick
65 Blade guard
66 Clamping handle of the parallel guide
67 Scale for clearance of the saw blade to the
parallel guide
68 Lower saw blade cover
69 Pins for attachment of the hold-down stick
70 Clamping lever
71 Clearance indicator
72 Screw for parallel guide clearance indicator
73 Guide of the parallel guide
74 Adjustment screw for tightening tension of
guide 73
75 Screws inside the glide pad of the parallel
guide
76 Set screws of the parallel guide
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools
Technical Data
Combination Saw
Article number
3 601 M15 ...
Rated power input W
No-load speed min
Laser type nm
mW
Laser class
Weight according kg
to EPTA-Procedure
01/2003
Protection class
Permissible workpiece dimensions (maximal/minimal):
Chop/mitre saw, see page 62
Table saw, see page 67
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Dimension of suitable saw blades
Saw blade diameter
Blade thickness
Mounting hole diameter
1 609 929 V07 | (7.12.10)
English | 55
GTM 12
Professional
... 0.. ... 060
1800 1650
-1
4300 4300
650 650
< 1 < 1
2 2
22.5 22.5
/II /II
mm 300–305
mm 1.5–2.5
mm 30