Pleasant Hearth WS-3029-1 Manual De Instrucciones página 4

Figure 0
Pedestal Base and Leg Installation
Before Installing Stove, Follow These Steps for
Pedestal Base and leg Installation.
Model: HWS-230292
ash pan
Large Wood Stove w/Pedestal Base
Pedestal base is pre-installed at the factory. No action is
required.
Model: WS-3029
Large Wood Stove w/Pedestal Base and Legs
Remove Ash pan and (4) bolts that secure the stove body
to the pedestal as shown in Figure 0.
With assistance, lift stove off of pedestal and lay stove
on its side on a safe, elevated, padded and level platform
that is about 6" off the ground.
Using the bolts that were removed in step 1, bolt each
leg to the bottom of the stove as shown in Figure 0.2.
With assistance, lift the stove off of the raised platform,
set upright on the legs, and re-install the ash pan.
When stove is in place for installation, make sure stove is
level by adjusting the leg levelers shown in Figure 0.3.
Model: LWS-130291
Large Wood Stove w/Legs
Remove ash pan and (4) bolts in angle iron bracket as
shown in Figure 0.1.
With assistance, lift stove off of wooden pallet and lay
stove on its side on a safe, elevated, padded and level
platform that is about 6" off the ground.
Using the bolts that were removed in step 1, bolt each
leg to the bottom of the stove as shown in Figure 0.2.
With assistance, lift the stove off of the raised platform,
Figure 0.2
set upright on the legs and re-install the ash pan.
When stove is in place for installation, make sure stove is
level by adjusting the leg levelers shown in Figure 0.3.
Figure 0.3
leg leveler
2