Publicidad
Safety Notes
WARNING: To avoid the risk of product
failure, property damage, and personal
injury, do the following:
This product should be installed by a licensed
professional plumber.
This product is for use with drinking water only.
Install this faucet in an accessible area. Keep away
from external heat sources. The hoses should not
be allowed to rub against other items under the
sink, such as a trash bin.
Refer to the Cleaning Recommendations on page
10 when selecting a cleaning agent for this
product. Do not use cleaning products containing
chlorine bleach, lye, hydrochloric acid, formic
acid, acetic acid, or abrasives.
Failure to follow these instructions may
result in product failure and property
damage, and may void the warranty.
Installation Considerations
• Read over these instructions thoroughly before
beginning installation. Make sure that you have
all tools and supplies needed to complete the
installation.
• This faucet is for use with an undercounter water
filtration system. It is for use with cold water only.
Do not connect this faucet to hot water.
Do not use this faucet with a reverse
osmosis (RO) system. Use with an RO system
will void the warranty.
• Do not use petroleum-based plumbers
putty with this faucet as it will damage
the finish. Use of petroleum-based plumbers
putty will void the warranty. Use clear silicone
sealant if desired.
• ¼" OD tubing is pre-installed on the faucet. If a
longer piece is necessary, the installer must provide
it. If the filtration system requires ⅜" tubing, use a ¼
x ⅜ compression adapter.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
2
English
Technical Information
Flow rate
Max. hole size in mounting surface
Max. depth of mounting surface
Thread size of inlet
* The actual flow rate will vary according to the flow rate of
the filtration system and conditions in the home.
1.5 GPM (5.7 L/min)*
1¼" (32 mm)
1⅜" (35 mm)
⁷⁄₁₆-24 UNS-2A
Publicidad
