Edesa EFC-7832 DNF EX /B Manual De Instrucciones página 10

8
EN
levelling foot, Install shaft of bottom
hinge on the other side and install the
bottom hinge on the other side.
5. A.Remove the upper cover of
refrigerating chamber door and the left
decorative cover, install the upper hinge
sleeve, door signal line to the other side
and install the door upper cover.
Dismantle the stopper, self-locking and
sleeve pipe of refrigerating chamber
door,Take out left self-locking of
refrigerating chamber door and right
decorative cover from accessory bag.
assemble the sleeve pipe,left self-locking
and stopper on bottom left of door with
screw, and then install the right
decorative cover.
B.Dismantle the stopper and sleeve pipe
from the bottom right of freezing
chamber door, assemble the sleeve
pipe,left self-locking and stopper on
bottom left of door by screw.
left decorative cover
self-locking
6. Put freezing door on bottom hinge and
install middle hinge, hole caps.
hole cap
levelling foot
bottom hinge
door upper cover
right decorative cover
door signal line
stopper
sleeve pipe
screw
A
stopper
self-locking
screw
B
7. Remove the magnetic switch of the right
hinge cover and install it on the left
hinge cover.
8. Remove the upper left hinge from the
accessory bag and place the door
body on the middle hinge,and install
the upper left hinge; connect the signal
line 5 on the top of the refrigerator to
the signal line 2 on the door, Connect
the signal cable 4 to the signal cable
6 and install the left hinge cover and
decorative cover.
sleeve pipe
sleeve pipe
ATTENTION
Differences:
and different models, some of the illustrations
in this manual may differ from your model.
Install Instruction
hole cap
middle hinge
magnetic switch
decorative cover
left upper hinge
Due to technical changes