WALMEC Walcom 360 True Light Evo Meter Instrucciones página 8

PARTS (fig. 1) Components list:
Item Spare part code
1 -
2 -
3 -
4 -
5 -
6 -
7 90242-A
(8) 90242-B
(9) 90242-C
(10) 90242-D
(11) 90242-E
12 90240
13 90243-S
14 90243-D
15 90244-S
16 90244-V
INSTALLATION
The 360 TRUE LIGHT EVO METER light is supplied with a partially charged battery, equipped
with an electronic safety device: upon first use or after each battery replacement it is necessary
to connect (even temporarily) the USB power supply to deactivate the electronic safety device.
Position the 360 TRUE LIGHT EVO METER light on the aircap ring, making sure that the hat/ring
is completely outside the LED protection glass.
Choose the reduction/adapter to apply inside appropriately of the LED ring,
checking that the light is firmly blocked on the ring.
For the expected coupling, check the updated table. Check here
If the rubber adapter is damaged or its friction function ceases, replace
it with a new one.
EN
Description
Body with LEDs and cards
Cover with sensor and display
USB gasket/cap and light on button
Lithium battery 18650 35E - 3400 mAh
M screw 2.5x20
Screw 2.2x9.5
Rubber adapter A
Rubber adapter B
Rubber adapter C
Rubber adapter D
Rubber adapter E
External protective glass
Sensor protection film
Display protection film
Support with magnet
Magnet stop knob
(fig. 1)
8