Publicidad
Idiomas disponibles
Idiomas disponibles
16. Do not use the cable/cord in bad conditions: Never judder the cable/cord to disconnect it from
the power plug. Keep the cable/cord away from heat, lubricant, and sharp edges. Inspect the
extenders on a regular basis and replace them if they are damaged.
17. Maintain tools with care: Keep cutting tools sharp and clean for better and safer performanc e.
Follow the instructions for greasing and replacing the accessories. Inspect the cables/cords of the
tools on a regular basis and have them repaired, if damaged, by an authorised servic e
representative.
18. Do not modify the machine: No modification and/or reconversion should be carried out. Use of
attachments or accessories other than those recommended in this instruction manual may result in
personal injury.
19. Keep the handles dry, clean and free of any lubricant or grease.
20. Disconnect tools: Disconnect tools from the power supply when not in use, before servicing and
when replacing accessories such as blades, drills and cutting components.
21. Remove the adjustment wrenches: Take the habit of checking whether the keys and other
adjustment components are removed from the tool before starting it.
22. Avoid unintentional starting: Ensure that the switch is in the "off" position when connecting.
23. Use external connecting cables: When the tool is used outdoors, use only extension cables
intended for external use with the corresponding marking.
24. Be alert: Look at what you are doing, use common sense, and do not use the tool when you are
tired.
25. Cheque damaged parts: Before using the tool for other purposes, it should be carefully examined
to determine that it will function correctly and perform its intended function. Cheque the alignment
or locking of the moving parts, as well as the absence of any broken parts or any mounting
conditions and other conditions, which may affaect the operation of the tool. A protector or other
damaged part must be properly repaired or replaced by an authorised service centre unless
otherwise specified in this instruction manual. Have faulty switches replaced by an authorised
service centre. Do not use the tool if the switch does not switch from on to off.
26. Burn hazard: Allow moving parts (tip) to cool before touching.
27. Warningt: The use of any accessory or attachment other than that recommended in this instruction
manual may present a risk of injury to persons.
Have the tool repaired by a qua lified person: This electrical tool satisfies the corresponding safety
28.
rules. Repairs should only be carried out by qualified persons using original spare parts. Otherwise,
this may expose the user to a significant danger.
WARNING:
The use of any accessory or attachment other than that recommended in this instruction
manual may present a risk of personal injury.
1.2.
General instructions
Keep away from liquid substances.
This tool has been designed only for dry sharpening operations.
Pay attention to the bits during sharpening operations.
The wicks warm up.
You must handle them carefully and allow them to cool down before storing them.
The sharpening head may become warm during use.
This is normal, and there is no reason to worry. You must handle it carefully and let it cool down.
Instructions for grounding
The machine has a two-pole plug.
Do not modify the plug in any way. This could be dangerous from a safety point of view, and could
render the guarantee void.
The ordinary voltage for domestic use is 220-240Volts.
If the tool is configured for support220-240V, you will have no problem using it on the outlets in the
SODISE 85 Route de Pont Gwin 29510 Briec
FRANCE
SODISE NIU 10434 V.2.2
9
Publicidad
