Publicidad
Idiomas disponibles
Idiomas disponibles
13. Extend the line 32 from the spool housing 11 and cut
so that it does not extend past the cutting blade 37 .
nOTE: Make sure that cover is fully positioned. Listen for
two audible clicks to ensure both release tabs are correctly
located. Following prior instructions, power the appliance
on. In a few seconds or less you'll hear the nylon line being
cut automatically to the proper length.
MAINTENANCE
WARNING:
serious personal injury, turn unit off and
remove the battery pack before making any
adjustments or removing/installing attachments
or accessories, when replacing line, or prior to
cleaning. An accidental start‑up can cause injury.
Your BLACK+DECKER power tool has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Cleaning
WARNING:
all air vents with clean, dry air at least once a week.
To minimize the risk of eye injury, always wear ANSI
Z87.1 approved eye protection when performing
this procedure.
WARNING:
harsh chemicals for cleaning the non‑metallic parts
of the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid get
inside the tool; never immerse any part of the tool into
a liquid.
Accessories
WARNING:
than those offered by BLACK+DECKER, have not been
tested with this product, use of such accessories with
this product could be hazardous. To reduce the risk of
injury, only BLACK+DECKER recommended accessories
should be used with this product.
Recommended accessories for use with your product
are available at extra cost from your local dealer or
authorized service center. If you need assistance in locating
any accessory, please contact BLACK+DECKER. Call
1-800-544-6986.
Resin blade
To reduce the risk of
Blow dirt and dust out of
Never use solvents or other
Since accessories, other
BZORB20
Replacing Guard (Fig. B, C)
WARNING:
without guard firmly in place. Damage or personal
injury could result.
Remove Current Guard
1. Remove the guard screw
2. Slide the guard
10
off.
Assembling the New Guard
1. Slide the guard into place as shown in Fig. B.
2. Replace and securely tighten the guard screw
Repairs
The charger and batteries are not serviceable. There are no
serviceable parts inside the charger or battery pack.
WARNING:
SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and
replacement, when applicable) should be performed
by a factory service center or an authorized service
center. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will help
you obtain more efficient warranty service in case there is a
problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration of
ownership will serve as your proof of purchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification is
required under the Federal Consumer Safety Act.
Register online at www.blackanddecker.com/
account/login.
Two-Year Limited Warranty
For warranty terms, go to
www.blackanddecker.com/warranty.
To request a written copy of the warranty terms, contact:
Customer Service at Black & Decker, 701 East Joppa Road,
Towson, MD 21286 or call 1-800-544-6986.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
check country-specific warranty information contained in
the packaging, call the local company or see the website for
such information.
English
Never operate appliance
21
shown in Fig. C.
.
21
To assure product
13
Publicidad
