Publicidad
Idiomas disponibles
Idiomas disponibles
Installation instructions - TT Coupé 2015▶
Edition 07/2014
Caution
Add-on components (such as a roof box, bicycle rack etc.)
must be securely fastened in the T groove on vehicles with
a sliding/tilting glass sunroof
nents" on page
12.
When installing add-on components, check that there is
enough room above the sliding/tilting sunroof before open-
ing it. If the add-on components are secured using assem-
bly brackets, the sliding/tilting glass sunroof must not be
opened — risk of damage resulting from a collision!
General safety notes
WARNING
Please read these assembly instructions carefully before
starting installation. Non-compliance with these assem-
bly instructions and safety notes will compromise your
safety and that of third parties.
WARNING
All bolt connections and connections for the roof bars
and for the add-on components must be checked prior to
travelling to make sure they are positioned and installed
correctly. Tighten if necessary.
Recheck bolted connections and connections at appro-
priate intervals and tighten if necessary. The bolted con-
nections and connections must be checked at short inter-
vals if travelling on a poor stretch of road.
If this guideline is not observed, this can result in the roof
bars or the add-on components becoming loose or falling
off — risk of accident!
WARNING
For the safety of other road-users, the roof bars and any
add-on components must be removed from the vehicle
when they are not being used.
WARNING
Repairs or the replacement of parts must only be per-
formed by a qualified workshop. It is recommended that
genuine spare parts available from your Audi partner are
used.
Caution
The height of the vehicle will change as a result of instal-
ling the roof bars with/without add-on components. Please
remember this when entering garages, driving through tun-
nels, underpasses etc.
4
2 Safety notes
⇒ " Installing add-on compo-
Publicidad
