Audi 8S8.071.126 Instrucciones De Montaje página 30

Installation instructions - TT Coupé 2015▶
Edition 07/2014
Installing the roof bars
– Carefully position both roof bars on the vehicle roof in the
area of the positioning bolts -X- and -Y-. The claw fasteners
must be in the installation position when positioning the roof
bars. Observe the labels -23- on the underside of the profile
tubes when positioning the roof bars.
Note
◆ The labels must be on the left-hand side of the vehicle and
the printed arrow must point in the direction of travel.
◆ When installing the roof bars, the vehicle doors can remain
closed because the positioning bolts are accessible from
outside the vehicle.
Installing the front roof bar
– Pull the sealing lip gently outward and carefully insert the in-
stallation aid -14- between the positioning bolts and rubber
lip. Now position the installation aid so that it is centred with
the positioning bolts -Y-. The positioning bolts -Y- must be
visible.
– Unhook the claw fastener -12- from the installation position
on the support bracket -9- by pulling upward, then swivel
down.
Note
The illustration shows the installation of the front roof bars.
10
4 Installing/removing roof bars on vehicle