Bosch 06019F6004 Manual Original página 15

Hold the power tool securely. When tightening and
u
loosening screws be prepared for temporarily high torque
reactions.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Technical data
Cordless Drill/Driver
Article number
Rated voltage
A)
No-load speed
– First gear min
– Second gear
min
Max. torque, soft Nm
screwdriving applica-
tion according to ISO
A)
5393
Max. torque, hard Nm
screwdriving applica-
tion according to ISO
A)
5393
Max. drilling diameter (first/second gear)
– Wood mm
– Steel
mm
Bosch Power Tools
GSR 12V-15 FC GFA 12-X
3 601 JF6 0..
V= 12
-1
0–400
-1
0–1300
15
30
19
10
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal and plastic.
The power tool can be used with an angle adapter (GFA 12-
W), off-set angle adapter (GFA 12-E), bit holder adapter
(GFA 12-X) or drill chuck adapter (GFA 12-B).
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Tool holder
(2) Torque presetting ring
(3) Gear selector switch
(4) Battery release button (2x)
a)
(5) Rechargeable battery
(6) Rotational direction switch
(7) On/off switch
(8) Battery charge indicator
(9) Worklight
(10) Bit holder adapter GFA 12-X
(11) Drill chuck adapter GFA 12-B
(12) Off-set angle adapter GFA 12-E
a)
(13) Angle adapter GFA 12-W
(14) Locking ring
(15) Handle (insulated gripping surface)
a)
(16) Universal bit holder
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GFA 12-B GFA 12-E
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
English | 15
a)
a)
a)
GFA 12-W
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
1 609 92A 8AH | (08.09.2022)