GE 23 Manual Del Propietario E Instalación página 11

ge.com
Door Alignment
If (loots are uneven, adjust tile refrigerator
(loot;
O Using a 7/16" wrench, utrn tlle (loot
adjusting screw to the dght to raise the
door; to the left m lower it.
(A nylon plug, imbedded in the
threads of the pin, prevents the pin
from utrning unless a wrench is used.)
0 At_er one or two turns of tile wrench,
open and close the refligerator door
and check the aligmment at the top
of the doors.
About the crispers andpans.
Not all features are on all models.
l
\
Fruit and Vegetable Crispers
Excess water dmt may accumulate in the
bottom of the drawers should be wiped dry.
Adjustable Humidity Crispers
Slide the control all tile way to tlle
H/setting to provide high humidil),
recommended for illost vegetables.
Slide the control all the way to the
LOsetting to provide lower humidity
levels recommended for
most
fluits.
About crisper removal
Not all features are on all models.
Crisper Removal
Crispers can easily be removed by pulling
tlle drawer straight out and lifting tile
drawer tap and over tile stop location.
If die door prevents you flom taking out
the drawers, first try m remove the door
bins. If this does not oflbr enough
clearance, the refligerator will need m
be rolled forward until the door opens
enough to slide the drawet_ out. In some
cases, when you roll the refligeramr out,
you will need m move the refligerator
m the left or right as you roll it out.
11