Publicidad
Idiomas disponibles
Idiomas disponibles
C. Appendix
C.1 Changing the ribbon
Removing the ribbon:
- Turn calculator off
- Slide cover plate to the rear and
remove
- Remove 1st ribbon spool
- Adjust ribbon reverse lever
- Remove 2nd ribbon spool
Note:
Use only original consumables
Art. No. 9360
Inserting the spool ribbon:
- Fits the spools and ribbon (red to the bottom) in reverse sequen-
ce. The ribbon can easily be fitted into the guide with the tip of a
pencil.
- Turn spool to tighten the ribbon.
- Replace cover plate, slide forward and secure.
C.2 Maintenance
Do not expose the machine to extreme temperatures, direct sun-
light, high humidity or dusty conditions.
Ensure that no liquids enter the machines.
Do not use solvents.
C.3 Technical data
Dimensions:
218 mm
289 / 355 mm
90 mm
Paper roll:
Width 57 mm
(Art.-No. 9367)
Max. diameter max. 80 mm
Printer:
Parallel character wheel printer
2-coloured print = 3.6 lines / sec.
Voltage:
230 V~ / 50 Hz
0.07 A...230 V~
Power requirement:
Weight:
1.60 kg
Capacity:
12 figure display
Only use the product indoors.
The symbol indicates that the design of the product complies
with Protection Class II (double insulation). A safety connection
to the electrical earthing (ground) is not necessary.
Spool ribbon
C.4 Warranty
Dear Customer,
we are delighted that you have chosen this equipment.
In the case of a defect, please return the device together
with the receipt and original packing material to the point-of-
sale.
C.5 Disposal
Find out about the possibilities of taking back used
appliances free of charge from your dealer.
The adjacent symbol indicates laws dictate that electrical and
electronic apparatus no longer required must be disposed of
separate from domestic waste. Dispose of your device at a
collection point provided by your local public waste authority.
Packaging materials must be disposed of according to local
regulations.
The packaging is made of environmentally friendly materials
that you can dispose of at local recycling points. Advice on
the options with which to dispose of your old device can be
obtained from your municipal or local administration offices.
Packaging materials must be disposed of according to local
regulations.
The device and packaging materials can be recycled; sort
them for disposal to simplify waste management. The Triman
logo is only relevant for France.
Observe the identification on the packaging materials during
the waste sorting process; they are identified by
abbreviations (b) and numbers (a) which have the following
significance: 1–7: plastic/20–22: paper and cardboard/80–
98: composite materials.
The device and the packaging material can be recycled, so
sort them prior to disposal for better waste management.
Contact your local authorities for information on the various
options available to ensure correct disposal. Observe the
following identifications of the packaging materials: (a)
numbers, (b) abbreviations and (c) materials which have the
following significance: 1–7: plastics / 20–22: paper and
cardboard / 80–98: composite materials and (d) type of
packaging. The logo is only applicable to Italy.
C.6 Cleaning
Switch off the unit.
Disconnect the power plug from the power socket.
Clean the surface of the housing with a soft, dry, lint-free
cloth. Do not use any solvents or cleaning agents.
C.7 Manufacturer
GO Europe GmbH
Zum Kraftwerk 1
D-45527 Hattingen
Germany
This instruction manual is purely informative. The contents are
not part of any offer for sale or contract. The specifications, ex-
tensions and options described may differ from country to
country. GO Europe GmbH reserves the right to revise
specifications, make modifications and tech-nical changes to
the product described here in without notifi-cation.
9
Publicidad
