Setting Up The Device; Connecting The Usb Cable; Battery Operation/Charging The Device; Adjusting The Aerial - Silvercrest SDR 15 A3 Guía Breve

.

Setting up the device

Place the device on a sturdy, level surface. Make sure that the device
is not exposed to intense sources of heat; the device is not exposed to
direct sunlight; the device does not come into contact with liquids, not
even water droplets or spray.
The device can be operated using the USB cable or the integrated
rechargeable battery.
..

Connecting the USB cable

Connect the USB-C plug of the supplied USB cable to the DC IN V
A port on the device.
Insert the USB-A plug into a suitable USB port.
..

Battery operation/charging the device

The device is fitted with an integrated rechargeable battery. The device
is operated using the integrated battery if no USB cable is connected to
the DC IN V
To charge the battery, connect the USB cable as described in
section ..
..

Adjusting the aerial

Pull out the telescopic aerial on the back of the device completely.
A socket.
English - 