Publicidad
Idiomas disponibles
Idiomas disponibles
•
The CST remote control must be handled with care. Do not
drop it or expose it to direct sunlight or sources of heat. It is
advisable to keep the CST remote control placed on a table
or a at surface. Do not hold the CST remote control in your
hand for long time to avoid altering the reading of the sen-
sors.
•
The CST sensors are also disabled if the CST remote control is
positioned at a distance less than 3.3ft (1 m) from the unit.
•
The CST remote control is equipped with touch sensitive
buttons.
•
The CST remote control is equipped with a dual color LED
(D10) (white/red). White indications are used for:
-
signaling the touching of each button with 3 fast ashes
-
it blinks every 30 seconds for data transmission
-
signaling the entering of pairing phase with periodic
blinking
-
signaling the battery status is "good"
C17
•
The same indications but in red color mean that the batter-
C15
ies are starting to be exhausted.
C8
Please note: The remote control can be safely stored in the ap-
C10
propriate compartment (A11).
TURNING THE APPLIANCE ON/OFF
C14
•
Plug into the outlet.
•
Touch the
ON/STAND-BY button (D1). When turned ON,
C16
the air conditioner starts operating in the same mode as
when it was turned o .
•
Touch the
ON/STAND-BY button (D1) again to switch the
C3
appliance o .
Please note: Never switch the appliance o by removing the plug.
C2
Always switch it o by touching the
and waiting for a few minutes before removing the plug. Only in
this way the appliance will perform its standard checks.
SELECTING THE OPERATING MODES
The operating modes available on the CST remote control
through the MODE button (D2) correspond to those on the ap-
pliance control panel (C).
SELECTING THE TEMPERATURES
In conditioning mode touch button (D3) or (D4) to select
the desired temperature.
SELECTING THE AIR FLOW
In conditioning and fan modes, touch
the desired air ow.
The air ows available are:
Minimum air ow: when room has cooled
down and you want a quieter operation.
Perfect!
Medium air ow: when the noise level needs
C5
C6
C7
C5
C9
C6
C7
C12
C5
C9
C6
C13
C7
C12
C9
C11
C13
C12
C4
C11
C13
C1
C4
C11
C1
C4
C1
ON/STAND-BY button (D1)
button (D7) to select
to be low but with a good comfort level.
Maximum air ow: for maximum perfor-
mance.
:
Auto
the appliance automatically chooses the
air ow based on the temperature selected and
the environmental conditions. This selection is
only available in air conditioning mode.
ECO REAL FEEL FUNCTION
ECO REAL FEEL is the innovative De'Longhi technology that works
simultaneously on temperature reduction and humidity control,
securing the best comfort level. With traditional systems, optimal
comfort conditions may be reached but not secured over time.
With ECO REAL FEEL, once optimal comfort is reached, compres-
sor operation and air ow are automatically modulated to keep
it consistent over time and save up to 30% on energy usage.
To activate the function, touch the
control and the ECO REAL FEEL symbol appears.
The "ECO REAL FEEL" status indicator (C9) becomes white for approx-
imately 1 minute to indicate that the appliance is checking the room
conditions.
Afterwards the "ECO REAL FEEL" status indicator (C9) changes color
as it approaches comfort conditions (see following diagram).
For this type of use, the appliance must be set up in the air con-
ditioning mode.
HIGH
MEDIUM
LOW
Perfect!
9
button (D9) on remote
Operating curve
Perfect!
TEMPERATURE
Publicidad
