Publicidad
Idiomas disponibles
Idiomas disponibles
1. Safety Instructions
WARNING ! Carefully read the entire instruction manual and understand the safety instructions
before installation, operation, repair, maintenance, changes. Failure to follow these instructions
may result in serious personal injury. If the device is to be passed on to other people, also pass
these instructions on to them.
Read all of these instructions before using this product and save this information.
1.1.
General Instructions
1. Use in a secure environment: there must be no risk of explosions or corrosive products in the
surrounding environment during use.
2. Use by qualified persons: Only qualified, experienced operators should use the device. Do not leave
anyone who has not read the manual and received appropriate instructions to use the appliance without
supervision by a qualified person.
3. Take into account the environment of the work area : do not expose the tool to rain. Do not use the
tool in damp, wet locations or where there is a risk of splashing water. Keep the work area well lit. Do
not use the tool in the presence of flammable liquids or gases or dust. Pay attention to the location of
compressed air pipes and other cables located near the workplace.
4. Maintain a clean and orderly work area : the work area must be visible from the working position.
Messy areas and workbenches are prone to accidents.
5. Use the tool in a stable position : maintain stable foot support and a comfortable posture. Change
posture in case of prolonged use, take regular breaks to avoid any discomfort or fatigue.
6. Keep other people away : Do not allow people, especially children, not involved in the work in
progress, to touch the tool or the extension, and keep them away from the work area, BE particularly
vigilant with children and animals.
7. Store unused tools : Unused tools must be stored in a dry or locked place, out of the reach of children.
8. Do not force the tool : a tool gives better results in a safer manner at the speed and power for which
it was designed.
9. Use the correct tool : Don't force a small tool or accessory to do the larger job. Do not use the tool for
any purpose for which it is not designed.
10. Wear suitable clothing and protective equipment : never wear loose clothing or jewelry, as they can
be caught by moving parts. It is recommended to wear protective gloves. Contain long hair. Wearing
non-slip shoes is recommended for outdoor work.
11. Use protective equipment: use safety glasses, a dust mask if work operations generate dust,
protective gloves, and hearing protection.
12. Connect equipment for dust extraction: If the tool is provided for connecting equipment for dust
extraction and collection, ensure that they are connected and correctly used.
13. Do not lean too much : maintain good support and remain balanced at all times.
14. Treat tools with care : keep tools clean to optimize work and safety. Follow instructions for lubricating
and changing accessories. Examine their condition periodically, if necessary, entrust their repair to an
approved maintenance station.
15. Stay alert : focus on work. Use good judgment. Do not use the tool when tired, or under the influenc e
of drugs, alcohol or medication.
16. Check for damaged parts : Before using the tool, carefully examine the condition of the parts to ensure
that they are functioning properly and doing their job. Check the alignment and freedom of operation of
moving parts, the condition and assembly of parts and any other condit ions likely to adversely affect
operation. Any part in poor condition must be repaired or replaced by an authorized service center
unless otherwise indicated in this instruction manual.
17. Accessories : Use only accessories appropriate for this tool.
18. Maintain tools carefully : Keep cutting tools sharp and clean for better and safer performance. Follow
instructions for lubricating and replacing accessories. Examine tool cables/cords regularly and have
them repaired, if damaged, by an authorized service center.
SODISE 85 Route de Pont Gwin - 29510 Briec - FRANCE
EN
SODISE NIU 06974 V.2.2
15
Publicidad
