Publicidad
Idiomas disponibles
Idiomas disponibles
Setting Up the Alert System on a Wi-Fi Network
Hardware installation must be completed before product registration and Wi-Fi setup. Ensure that electrical power and Wi-Fi are
available. The activation module does not need to be Wi-Fi enabled to work with a building or irrigation management system.
Enable Wi-Fi to send email alerts independently of a third-party controller.
Initiating the Process
1. After the activation module is plugged in, wait until the
Wi-Fi blue LED starts to blink.
2. Use a mobile phone or computer to scan for new Wi-Fi
networks, then do the following:
– Choose FreezeMonitorSetup-xxxxx. (The variable
is an alphanumeric string unique to the device.)
– Enter password freezemonitor.
3. If the Watts webpage does not open automatically,
launch a web browser and enter http://10.10.0.1, or
scan the QR code below.
4. Review the privacy policy scrolling to the end then tap
Agree and Continue.
5. Review the terms of use scrolling to the end then tap
Agree and Continue.
6. When the setup menu is displayed, tap Begin to
complete the 4-step process.
Completing the Setup
Step 1 Product Registration. Complete the required
fields (marked with *) to register the product then
tap Next.
– Enter first name.
– Enter last name.
– Enter street address.
– Enter city or town.
– Choose state from the pull-down list.
– Enter zip code.
4
Publicidad
