Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
FAN-ONLY MODE
1.
Plug in the unit, press the reset button on the GFCI, and
select a fan speed on the control panel. The fan will start
running as soon as you select a fan speed.
2.
To start/stop fan oscillation, push down/pull up the clutch
knob (G).
3.
To adjust the airflow upward or downward, simply tilt the
fan head by hand and move to the desired angle.
4.
The height of the fan can be adjusted by loosening the
height adjustment knob (O) and carefully raising or
lowering the fan and retightening the knob.
MISTING MODE
1.
Connect a standard ¾" garden hose to the misting hose valve (S). Water
pressure should not exceed 550 kPa (5.6 kfg/cm2). Only use a hose in good
condition.
2.
With the garden hose turned on at the spigot, turn the lever on the misting
hose valve to the right to turn on water to the fan.
3.
Turn the lever back (to the left) to temporarily disable the misting feature.
To disable the misting feature for a longer period of time, close the water
valve lever and turn the spigot off as well.
www.newair.com
EN
3
2
1
0
12
Publicidad
