Lenco SCD-331BK Manual De Usuario página 11

FM RADIO
1. Select the FM Radio mode.
2. Press the "TUNE +/-" button to select the desired station.
*FM Stereo indicator on = Stereo broadcast program is received
If the stereo reception of your favorite station is not ok you can press the FM ST (6) button to
manually switch between Stereo (ST) or Mono (NO) music play. In Mono mode the reception
can be improved for that channel.
AUTO PRESET
1. Press and Hold the "PLAY/PAUSE" button to do full "Auto Scan". Channels with good
reception will be stored as preset.
2. Press the "PRESET" or "SKIP+/- " button to choose the preset station
MANUAL PRESET
1. Press the "TUNE +/-" button to select the desired station.
2. Press the "PROG" button to be manual preset mode
3. Press the "P +/-" button to select the desired station
4. Press the "PROG" button to confirm
5. Press the "P +/- " button to choose the preset station
AUX
1. Select the Aux mode.
2. Use a 3.5mm Jack cable(not included) to connect an external audio player to the Line in
port on the back of the SCD-331
3. Change the volume level on this device and External Music Device separately
ENERGY SAVING
To comply with the energy saving requirement this device will automatically switch to
standby mode when no music has been playing for 10 minutes.
11