Lenco SCD-331BK Manual De Usuario página 9

VOLUME
Press the "VOLUME +/-" button to adjust the volume level.
ANTENNA
Use Antenna to improve the radio signal reception.
1. Fully extract the antenna
2. Adjust the position of the antenna for the best reception
CD OR MP3/CD
1. Select the CD mode.
2. Put CD or MP3/CD into the CD door insides
3. Auto CD or MP3/CD reading & playing from first track
4. Press the "PLAY/PAUSE" button to do playback or pause playback temporarily
5. Press the "SKIP+/-" button to skip the next or previous tracks
6. Press and Hold the "SKIP+/-" button search the point of sound quickly
7. Press the "STOP" button to stop the playback
CD Notes:
a. Dirty or scratched CD'S may cause a skipping problem. Clean or replace the CD.
b. If an error display or malfunction occurs, disconnect the AC cord and remove all the
batteries. Then turn the power back on.
USB PLAYBACK
1. Select the USB mode.
2. Connect USB drive into the USB port
3. Auto USB reading & playing from first track/folder
4. Press the "PLAY/PAUSE" button to do playback or pause playback temporarily
5. Press the "SKIP+/-" button to skip the next or previous tracks
6. Press and Hold the "SKIP+/-" button search the point of sound quickly
7. Press the "STOP" button to stop the playback
9