Publicidad
Idiomas disponibles
Idiomas disponibles
•
Begin to drain away water and spin.
5. When all operations finished, the buzzer emits a noise.
•
Before spinning, please make sure there are no nails, keys or other foreign matters in
the tub to avoid unnecessary loss.
•
During the process of spinning, the actual spinning speed may be inconsistent with
the program speed, which is because the washer adjusts the speed according to the
balance between clothes.
•
There may be rhythmic drone during spinning, which is the normal voice of drain
bump rather than the machine fault.
•
In the Spin program the machine does not wash, only the drum spins. In the
Rince+Spin program, the machine does not wash, the drum spins and the water is
discharged.
Tub Clean function
1. Preparation for washing.
•
Please make sure nothing in the tub before cleaning.
•
Open the distribution box, add the liquid bleach in the main box.
•
Don't add detergent or laundry detergent to prevent causing too much foam.
•
Close the distribution box.
•
Please make sure the inlet pipes connected well and the tap turned on.
2. Press the power button.
3. Press the "Temp." button for more than three second, which can choose the tub
cleaning program.
4. Press the Start/Pause button.
•
The programs begin to operate after the door locked.
5. When all operations finished, the buzzer emits a noise.
•
After finish the program, dry the inside part of the machine to prevent the door from
distorting.
•
If there are children at home, please don't open the door for too much time.
Child Lock function
•
Prevent children from using the washer.
•
Set the solving method: when the washer is operating, press the "Delay" for more than
three seconds and the child-lock works; then pressing "Delay" for more than three
seconds can relieve child-lock.
•
When the washer is operating, after setting the child-lock, all buttons cannot work
except the power button; once the child-lock is set, when the washer finishes all
programs, press the power button to cut the power and the child-lock can't relieve by
itself, when the washer operates again, press "Delay" for more than three seconds to
relieve the child-lock.
•
When the child-lock is working, if you want to change the washing program, please
relieve child-lock first and restart the machine to choose new washing program; if you
72
Publicidad
