Publicidad
Idiomas disponibles
Idiomas disponibles
When washing machine is frozen
1. Cover stopcock and connecting part with hot towel.
2. Take off the inlet pipe, and put it into 50-degree water.
3. Pour into the drum about 2-3L of 50-degree water.
4. Connect inlet pipe, turn on the stopcock and start the washing machine, please check
whether inlet and outlet are normal.
a. Faucet
Connecting part
Inlet pipe
The Clearance of dewatering-pump filter (Suggest: once/month)
1. Press fastener on the pump after dewatering and power off, open the lid of water-pump
filter. (Attention: if hot water inside, please go ahead after it be cold.)
2. Take off the filter anti-anticlockwise.
3. Wash the filter.
4. Direct at pump and insert the filter, tighten it clockwise and tighten the lid.
Attention:
The Drum Clearance (Suggest once/month)
After using for a period, some dirt maybe exists. You can clean the inside and outside of drum
by operating the drum procedure.
Attention: please do not put cloths and detergent when clearing the drum.
b. Take off the inlet pipe, and put
it into 50-degree water.
50-degree
water
a. Please tighten the filter well to avoid leak.
b. Please do not clean during operation.
c. Pour into the drum about
2-3L of 50-degree water.
76
50-degree
water
Publicidad
