Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION:
Starting the trimmer (See Fig. G1, G2)
G1
G2
EN
1. Hold the trimmer firmly with your right hand on
the control handle – wrap your thumb around the
handle. Hold the trimmer with your left hand on
the auxiliary handle– wrap your thumb around the
handle.
2. Press the On / Off Switch until the green LED is
lit. The green LED shows the power level. Press
the minus sign (-) on the speed control to select a
lower cutting speed if needed.
3. Push the Safety Lock Off Lever forward first, then
squeeze and hold the throttle trigger to start the
machine.
Selecting the speed
2 Power Levels can be selected depending on the
application. Use the +/- to control the speed, which
is as indicated by the LEDs. The higher the power
level, the faster the tool runs.
Bump-line feed system (See Fig. H)
The trimmer is equipped with a bump-line system.
Just bump the trimmer head while the machine is
running, new line will feed out.
12
H
15m (50ft)
Cutting Tips (See Fig. I)
I
15m (50ft)
1. Swing the trimmer from side to side across the
area to be cut.
2. Use the tip of the cutting line to do trimming; do
not force the trimmer head into uncut grass.
3. Wire and picket fences may cause extra cutting
line wear and breakage. Stone and brick walls,
curbs, and wood may wear cutting line rapidly.
4. Avoid trees and shrubs. Tree bark, wood
moldings, siding, and fence posts can easily be
damaged by the cutting line.
5. The selected power level affects the battery's
runtime. The lower the power level, the longer
the runtime. It is recommended to use the lowest
power level unless in worse cutting condition.
For Battery tools
The recommended ambient temperature range for
discharging is -4°F~113°F (-20℃~45℃).
The recommended ambient temperature range for
the charging system during charging is 23°F~113°F
(-5℃~45℃).
15m (50ft)
15m (50ft)
Publicidad
