cecotec CONGA GRASSHOPPER 800 CONNECTED Manual De Instrucciones página 135

The mower is
blocked
Some cable is tangled or damaged
Put on dielectric gloves and unplug the power cable.
1. Unscrew the knob between the extension lead and the adapter.
2. Get a new adapter of the same model and replace it.
3. Restart the mower.
If you notice abnormal vibrations:
1. Switch off the mower.
2. Turn it over.
3. Check the blades for damage. We recommend that you replace all three blades.
4. Turn the mower over and start it up again.
Settings
Does my garden need to be Wi-Fi connected?
- Try to ensure that the Wi-Fi connection covers your entire garden.
- If this is not possible, at least make sure that there is a Wi-Fi connection in the area
where the charging station is placed. Thus, the information from the mower will be
transmitted from the charging station to the app and vice versa.
*Please note that when pairing the charging station, the mower will need to be connected to
the internet.
What do I do if the QR code is not recognised?
If you cannot scan the QR code, connect the mower via Bluetooth.
Operation
Why does the mower sometimes hit some obstacles?
- The mower uses a reactive navigation system, whereby it modifies its trajectory
according to the obstacles it hits.
How can I restart the mower if I have pressed the STOP button?
- For safety reasons, press
You have entered an incorrect
PIN code too many times
+ or
1. You will have to wait for 50
minutes before trying to
enter the PIN again.
2. If you do not remember
which one it is, please
contact the official Cecotec
Technical Support Service.
+ on the display.
CONGA GRASSHOPPER 500 CONNECTED
ENGLISH
135