B
Product usage
Operations
WARNING!
•
Never use the product to clean the following substances: explosive or flammable
gases, liquids and dust (reactive dust), in addition to magnetic, toxic, flammable
or combustible reactive metal dust (e.g. aluminium). Do not use the product
to clean sharp, hot or incandescent objects at temperatures above 40°C, such
as cigarettes or hot ashes.
•
Do not use this product near working fireplaces or heaters. Doing so may
result in deformation of the product casing.
•
Unplug the charging cable after the Floorwasher is fully charged. Do not
overcharge the battery. Doing so may cause overheating or deformation of
the battery.
CAUTION!
•
Never use the product without the filter or water cups.
•
This product is suitable for hard floor of indoor environment, including waxed
floor, stone floor, rubber floor, marble floor, granite floor, terrazzo floor, solid
wood floor, composite floor, bamboo floor, and all kinds of mirror tiles, porcelain
tiles, etc.
•
If the product is used on uneven surface, the best cleaning effect may not be
achieved.
•
When the Floorwasher is not in use, place it upright against a wall corner to
prevent from tripping over and causing any injuries.
Charge the Floorwasher
1.
Place the Floorwasher on the charging base.
2.
Connect the charging cable to the charging base and the power socket.
NOTE: When charging, the LED around the battery charging icon
animates on the display panel.
•
Make sure the Floorwasher is fully charged before use.
•
Place the charging base in a dry place.
•
The Floorwasher emits a small sound when the battery is cooling down. This
is normal for optimizing battery charging.
Use the Floorwasher
Fill the clean water cup
NOTE: We recommend that when you use the Floorwasher for the first time,
connect the Floorwasher to the power supply and keep the main body upright.
Then, fill up the clean water cup as described below. This will allow you to easily
determine the appropriate amount of water needed.
9
EN
lights up and