Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Clean and empty the dirty water cup
When the dirty water cup is full, the Floorwasher will turn off automatically. The LED of
the Dirty water cup full icon
Press the dirty water cup release button, and then pull out the cup.
While holding the cup, press the dirty water cup release button and pull upward to
remove the cover with the dirt separator from the cup.
Empty the cup and clean the residues on the inner wall of the cup with the cleaning
brush provided. Then, rinse the cup clean.
If you find blockage in the dirty water cup, rinse the cover, the float and the dirt
separator with tap water.
Clean the HEPA filter
We recommend that you clean the HEPA filter with tap water after each use.
Remove the HEPA filter from the dirty water cup.
Clean the filter under running tap water.
After cleaning, allow the filter to air dry before installing back to the dirty water cup.
Re-attach the dirty water cup
After cleaning, allow the cup, the HEPA filter, the cover with dirt separator to dry.
Place the HEPA filter back to the cover, and then place the cover back to the dirty
water cup.
Insert the dirty water cup back to the main body. Push the cup in until it clicks into place.
Clean the rolling brush cover and the rolling brush
Tips:
• We recommend that you clean and dry the rolling brush
and its cover after each use.
lights up on the display panel.
14
EN
Publicidad
