Publicidad
Idiomas disponibles
Idiomas disponibles
ATTENTION!
Only use salt specifically designed for use in dishwashers! All other types of salt not
specifically designed for use in a dishwasher, especially table salt, will damage the water
softener. In case of damages caused by the use of unsuitable salt the manufacturer does
not give any warranty nor is liable for any caused damages.
Only fill with salt just before starting one of the complete washing programmes.
This will prevent any grains of salt or salty water, which may have been split, remaining on
the bottom of the machine for any period of time, which may cause corrosion.
After the first wash cycle the control panel light expires.
A. Remove the lower basket and then unscrew and remove the cap from the salt container.
1
B. If you are filling the container for the first time, fill 2/3 of its volume with water (around
500ml). 2
C. Place the end of the funnel (supplied) into the hole and introduce about 2kg of salt. It is
normal for a small amount of water to come out of the salt container.
D. Carefully screw the cap back on.
E. Usually, the salt warning light will be off in 2-6 days after the salt container is filled with
salt.
NOTE: 1. The salt container must be refilled when the salt warning light in the control panel
comes on. Though the salt container is filled enough, the indicator light may not black out
before the salt fully dissolve. If there is no salt warning light in the control panel (for some
models), you can judge when to load the salt into the softener by the cycles that the
dishwasher had run (see the following schema).
2. If there are spills of the salt, a soak program could be run to wipe them out.
WARNING: if salt is not added it will cause poor cleaning effect of dishes, and will produce
scale.
78
Publicidad
