Publicidad
Idiomas disponibles
Idiomas disponibles
ATTENTION:
The installation of the pipes and electrical equipments should be done by professionals.
INSTALLATION
Keep this instruction manual in a safe place for future reference. If the appliance is
sold, given away or moved, please ensure the manual is kept with the machine, so
that the new owner may benefit from the advice contained within it.
Please read this instruction manual carefully: it contains important information
regarding the safe installation, use and maintenance of the appliance.
If the appliance must be moved at any time, keep it in an upright position; if absolutely
necessary, it may be tilted onto its back.
POSITIONING AND LEVELING
1. Remove the appliance from all packaging and check that it has not been damaged during
transportation. If it has been damaged, contact the retailer and do not proceed and
further with the installation process.
2. Check the dishwasher by placing it so that its sides or back panel are in contact with the
adjacent cabinets or even with the wall. This appliance can also be recessed under a
single worktop (see the Assembly instruction sheet).
3. Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet
of the appliance may be adjusted until it reaches a horizontal position (the angle of
inclination must not exceed 2 degrees). If the appliance is levelled correctly, it will be
more stable and much less likely to move or cause vibrations and noise while it is
operation.
CONNECTING THE WATER AND ELECTRICITY SUPPLIES
Connection to the water and electricity supplies should only be performed by a
qualified technician.
The dishwasher should not stand on top of the water hoses or the electricity supply
cable.
The appliance must be connected to the water supply network using new piping. Do
not use old piping.
Warning!
Electrical Shock Hazard!
Disconnect electrical power before installing dishwasher.
Failure to do so can result in death or electrical shock.
95
Publicidad
