Celexon HomeCinema Plus Manual De Instrucciones página 27

MOUNTING ON THE WALL OR ON A FURNITURE BACK PANEL
Mark an „installation line" at the height where the screen is to be positioned
later. The „installation line" corresponds to the lower edge of the screen
housing.
Mark the centre of the screen on the installation line (Fig.1). The distance of the
two mounting brackets (centre to centre of the brackets!) varies depending
on the size of the screen and is listed in the table below. Accordingly, the two
brackets are located with half the distance to the left and right of the centre
mark of the screen respectively. Mark this exactly on the installation line.
Size (inch)
Distance A (mm)
Wall or furniture back panel
Attention: Please note the 2 possible installation methods (Fig.2)!
Depending on the method used, align the mounting brackets accordingly on the
installation line in such a way that the surface of the bracket on which the
screen is placed is the same as the installation line! Align the brackets with the
installation line and mark the 4 drill holes per bracket on your wall.
92" (16:9) 100" (16:9)
1.630 1.810
110" (16:9)
1.910
Load bearing surface
120" (16:9)
2.130
Fig. 1
7