Ruijie Reyee RG-ES126S-P V2 Manual Del Usuario página 5

LEDs and Ports
①
Port 1 24 10M/100M Link Act
SYS
1 3 5 7 9 11 13
2 4 6 8 10 12 14
1. System Status LED
2.10/100Base-TX Link/Act LED
3. PoE Status LED
4.10/100/1000Base-TX Copper Port LED
5.10/100/1000Base-TX Combo Port LED
6. Dip Switch
Specifications
Model
Standard & Protocol
Port
PoE
Switching Capacity
Maximum Power Consumption
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Working Mode
②③ ④⑤ ⑥
1 2 3 4
10M/100M Link Act Good Supply
Port 25 26 PoE LED
1000M Link Act Over Load
15 17 19 21 23 25
Port
16 18 20 22 24 26 26F
Flow Control On
Flow Control Off
Port Isolation
RG-ES126S-P V2
IEEE802.3i, IEEE802.3u, IEEE802.3x,
IEEE802.3az, IEEE802.3at, IEEE802.3af
24 10/100 Mbps Self-adaptive Ethernet ports (Auto
MDI/MDIX)
One 10/100/1000 Mbps Self-adaptive Ethernet
port (Auto MDI/MDIX)
One 10/100/1000 Mbps combo port
Ports 1 to 24 support PoE power supply.
IEEE802.af-compliant and 802.3at-compliant
Maximum PoE output power: 370 W
Maximum PoE output power per port: 30 W
8.8 Gbps
410.2 W
0°C to 45°C (32°F to 113°F)
4 - 0ºC to 70ºC ( 40°F to 158°F)
10% to 90% RH (non-condensing)
5% to 90% RH (non-condensing)
Standard mode: Flow control is enabled and all
⑦
5 6 7 8 9 10 11 12 13 14 15 16 17 18
7.10/100Base-TX Self-adaptive Ethernet Port
8.10/100/1000Base-TX Self-adaptive Ethernet
Port
9.100/1000Base-X Combo Port
-
3
⑧ ⑨
19 20 21 22 23 24 25 26
RG-ES126S-P V2
26F