Descargar Imprimir esta página

SANZ Clima Dreiha CBX 90N Manual página 13

Idiomas disponibles

Trouble shooting

Issues

Refrigerator does not work

Refrigerator compartments are too

warm

Food is frozen

There is "water flow" noise from

inside the refrigerator

There are waterdrops around the

refrigerator casing or door gap

The compressor is slightly noisy

when starting

Code F1 displayed

Code F2 displayed

Code F3 displayed

Code F4 displayed

Code F5 displayed

Code F6 displayed

Code F7 or F8 displayed

Cause/ Suggestions

Check if the switch is on.

Check if the plug and socket are connected well.

Check if the fuse has been burnt.

Check if the power supply is malfunctioned.

Switch on/off the fridge frequently may cause start delay of the

compressor.

The door is opened frequently.

A large amount of warm or hot food was stored recently.

The refrigerator has been disconnected for a long time.

The temperature was set too low.

It´s a normal phenomenon, caused by the flow of refrigerant.

It´s a normal phenomenon, the moisture will condense to water

when it touches a cold surface of the refrigerator.

It´s a normal phenomenon, the noise will be reduced after the

compressor works stably.

Possible cause: low voltage to fridge.

Adjust the battery protection from High to Medium or from

Medium to Low.

Possible cause: condenser fan is overloaded.