SANZ Clima Dreiha CBX 90N Manual página 8

It is highly recommended that the installation fridge is carried out by a qualified person. Enough free wire needed
to be kept for moving the fridge into the cabinet.
STEP 4: Push the fridge into the cabinet carefully to avoid scratching the floor, and the power cable should be
kept loosen.
STEP 5: Fix the refrigerator. There are three methods you can choose (only for reference):
Method 1: Mount the fridge, with the cabinet wall. The screw holders 1,2,3,4 is built in the side wall of the
refrigerator, a hole needs to be drilled trough the screw holders into the side metal panel with screws
(M5,15mm minimal) and fix it on the wall; after that, use the screw cover to cover the hole. (If the refrigerator
a hole needs to be drilled trough, it should be confirmed before leaving the factory. The screws are not included
with the refrigerator.
Inner Length: 430mm
Connect the red cable to the positive terminal of the
battery. Connect the black cable to the negative
terminal of the battery.
(Pre - installation)
Example 1- Mount to the cabinet wall
7
Wire Length to Refrigerator
Maximum 6 m
Maximum 11 m
Maximum 17 m
Screw
Screw holder
(Installation)
Wire Gauge
14AWG
12AWG
10AWG
Screw cover
90N